Samsung Top Load Washing Machine Not Working In Barabanki - A Real Service Visit
A few days ago, we received a service call from a lady living in PWD Colony, Barabanki. She was facing a problem with her Samsung top load washing machine not working in Barabanki. The machine was switching on, but neither the drain function nor the spin function was working.
She explained the problem over the phone and asked us to visit her home. We assured her that we would check the machine and try to identify the actual fault.
For professional washing machine repair support in the area, visit our Washing Machine Repair In Barabanki page to explore available repair services in Barabanki.
How Did We Receive This Service Request?
During the call, the customer told us that her washing machine was not working properly. It was not draining water, and the spin function was also not operating.
We informed her about our visit charge of ₹399 for Barabanki. She agreed and asked us to come to her home. We assured her that our team would visit within 24 hours.
The next day, we travelled to PWD Colony with our team to inspect the washing machine. Since the customer had already shared the brand and machine type with us over the phone, we had also carried some relevant spare parts.
Initial Inspection of the Samsung Top Load Inverter Washing Machine
When we reached the customer’s home, we first checked the machine’s operation. It was a Samsung top-load inverter model. The machine would switch on, but it was not proceeding with the washing process.
Before checking any internal components, we decided to check the power supply. This is one of the first things we do when a washing machine shows unusual operating behaviour.
The voltage at the customer’s home was fluctuating between 230V and 237V, which was sufficient during our check. We then started inspecting the machine’s components one by one.
First, We Suspected the Drain Motor
Our initial suspicion was the drain motor. During operation, we noticed that its gear would pull once and then slip instead of completing its movement.
We had already brought a new genuine Samsung drain motor, so we replaced it and tested the machine again. However, the problem remained exactly the same. The machine still would not proceed with its normal operation.
Next, We Checked the Motherboard and Pressure Sensor
After the drain motor replacement did not solve the issue, we checked the motherboard. At that stage, it appeared to be working properly.
Our next suspicion was the pressure sensor. We installed another new genuine sensor for testing, but even after that, the machine continued to show the same problem.
While we were carrying out these checks, something unexpected happened. The motherboard itself stopped powering on.
This was the first time our team had encountered such a situation during this type of inspection. Since the problem was not getting resolved at the customer’s home, we discussed the situation with her and decided to bring the complete washing machine to our service centre for further diagnosis.
The Machine Started Working Normally at Our Service Centre
After bringing the machine to our service centre, we connected it and checked its operation again.
To our surprise, the washing machine started working properly. It was completing its operation without the problem we had observed at the customer’s home.
This changed our direction of diagnosis. If the same machine was working normally at our service centre, there could be something related to the electrical supply conditions at the customer’s location.
To understand this unusual behaviour, I discussed the case with a friend of mine who works as a head engineer at Samsung’s authorised service centre.
He explained an important point about this particular model. According to him, the model can be sensitive to earthing and neutral supply conditions. Even if the machine switches on, weak neutral or improper earthing may prevent it from proceeding with its normal washing process. It may keep sensing but fail to move to the next stage.
This gave us another possible direction to investigate. Instead of replacing more components, we decided to check how the machine behaved at the customer’s home when connected at a different location.
We Visited the Customer's Home Again
After discussing the issue, we went back to the customer’s home in PWD Colony, Barabanki.
This time, we decided to place the washing machine at another suitable location inside the house and check its operation.
We connected the machine and started it again. This time, it worked properly. The machine started operating normally without showing the earlier problem.
This indicated that the issue was likely related to the electrical supply conditions at the original installation point rather than a confirmed fault in the washing machine components.
We explained the complete situation to the customer. We also told her why the machine was behaving differently at her home and at our service centre.
After completing the visit, we collected our ₹399 visit charge along with the applicable transportation charge.
What Did the Customer Tell Us?
After the issue was identified, the customer shared something that made this visit even more memorable for our team.
She told us that she had already shown the washing machine to three or four technicians before contacting us. However, none of them had been able to identify why the machine was starting but not proceeding with its normal operation.
She was very happy that we had taken the time to check the machine step by step instead of simply recommending another part replacement.
She thanked our team for understanding the problem and explaining the actual situation to her.
For us, the best part of this visit was not replacing a component. It was understanding why the same washing machine was behaving differently at two different locations.
What Advice Did We Give the Customer?
Before leaving, we advised the customer to get the earthing and neutral supply at her home checked by a qualified electrician.
We also explained that if she faces a similar problem again, she can have the machine tested at another suitable location with a proper power connection. If it works there but not at its original location, the electrical supply at the original point should be checked.
We did not want her to spend money replacing washing machine components when the actual issue might be related to the electrical connection.
One thing we learned from this visit is that every washing machine problem does not necessarily come from the machine itself. Sometimes, the installation point and electrical supply conditions also need attention.
Our Experience with Samsung Top Load Washing Machine Problems in Barabanki
This visit to PWD Colony was a good learning experience for our entire team. We checked the voltage, inspected the drain motor, tested the motherboard and pressure sensor, and then checked the machine again at our service centre.
The important lesson was to avoid jumping to conclusions. A machine that switches on but does not proceed with its cycle may need a different kind of inspection than simply checking or replacing its internal components.
At Smart Care Services, we try to understand the actual reason behind a complaint before recommending a repair. We provide independent home-appliance repair services in Lucknow and nearby areas, including Barabanki.
If your Samsung top-load washing machine is showing a similar problem, you can contact us to discuss the symptoms and arrange an inspection.
Smart Care Services
Phone: 08009916596
Written by Danish Siddiqui
Founder, Smart Care Services, Lucknow.